*** NEW! Show Most Recent Trade Leads First
| Bid |
Type |
Language / Subject |
| 0 | Sell | US Type Drop Forged Wire Rope Clips
...ory: Rigging hardware, Rigging
2. Material: Malleable Cast Iron/Stainless Steel/Carbon Steel
3. Size:1/4-1 inch
4. Technology: Casted/Forged
5. Surface... ...let or as per customers’ requirements
7. Produce Process: Drawings→ mould making → pre-forging →rough machining or finish machining U...
Posted on: 2014-12-23 from China - Shandong
|  | | 0 | Sell | High rigidity stripper ball bearing guide pin and bushing for die set
...igidity Aluminum Ball Bearing Guide Pin and Bushing for Die Set
Material: Steel, Aluminum
Type: High Rigidity
Stopper: No Stopper
Color: Blue
Process:... ...phericity: 0.00025mm
Standard: JIS, DIN, AISI (Custom Made) Application: Moulds
Description: 1. Made from high quality, durable and long lasting harden...
Posted on: 2014-01-08 from China - Guangdong
| | | 0 | Sell | Coil spring. Compression spring. tension spring
...ng. Compression spring. tension spring., Mould spring,, Material: Spring steel. Color: Coffee. Red. Blue. Green. Yellow
Standard: MISUMI. PUNCH
... Coil spring. Compression spring. tension spring., Mould spring,, Material: Spring steel. Color: Coffee. Red. Blue. Green. Yel...
Posted on: 2013-08-27 from China - Guangdong
| | | 0 | Sell | Good quality nail making machine 0086-13939083413
Make nail from used reinforcing steel bar is the high technical usage and recycle the waste to make nail. Advan... ...aterial. This machine could produce 50-180 mm (2,2.5,3,4,5,6 inches), the mould could change for the different nails. Nail Making MachineModel: GLZD-4
...
Posted on: 2014-01-04 from China - Henan
| | | 0 | Sell | Reinforced endotracheal tube prodution line
Equipment configuration: Main engine: It is made of stainless steel and aluminum alloy, electronic control is used Mitsubishi control system.... ...ccording to the capacity, It made of stainless steel and 304 steel liner. Mould: 1.mould plate:20pcs. 2.mould core:
Posted on: 2013-11-29 from China - Guangdong
| | |
| | 0 | Sell | Tool steel, alloy steel, special steel, die steel, mould Steel
We could produce high quality tool steel for mold making with huge quantity. Please kindly check our production lin...
Posted on: 2013-10-20 from China - Hubei
| | | 0 | Sell | Reinforced endotracheal tube plant
Equipment configuration: Main engine: It is made of stainless steel and aluminum alloy, electronic control is used Mitsubishi control system.... ...ccording to the capacity, It made of stainless steel and 304 steel liner. Mould: 1.mould plate:20pcs. 2.mould core:
Posted on: 2013-11-13 from China - Guangdong
| | | 0 | Sell | CNC milling hi precise die casting stainless steel parts rapid prototypes
...types
2.SLA/SLS 3D Printing rapid prototypes
3.Vacuum casting /Silicone mould
4.OEM design service
5.Mould, Injection Mould, Mass Production
We hav...
Posted on: 2013-09-26 from China - Guangdong
| | | 0 | Sell | Reinforced endotracheal tube machine
Equipment configuration: Main engine: It is made of stainless steel and aluminum alloy, electronic control is used Mitsubishi control system.... ...ccording to the capacity, It made of stainless steel and 304 steel liner. Mould: 1.mould plate:20pcs. 2.mould core:
Posted on: 2013-08-31 from China - Guangdong
| | | 0 | Sell | Die cast aluminum rotor
...C
standard motor, Pump, Wind
turbine 4.material :cold-rolled
silicon steel (0.5mm thickness), or
steel (Q195-Q235A and so on.) 5.frame No.:80-90-1... ...hat we can do
for you are as follows, (1) open stator and rotor punch
mould and diecasting mould
(2) punch stator and rotor
laminations for...
Posted on: 2013-04-26 from China - Henan
| | | 0 | Sell | AC motor stator
...C
standard motor, Pump, Wind
turbine 4.material :cold-rolled
silicon steel (0.5mm thickness), or
steel (Q195-Q235A and so on.) 5.frame No.:80-90-1... ...hat we can do
for you are as follows, (1) open stator and rotor punch
mould and diecasting mould
(2) punch stator and rotor
laminations for...
Posted on: 2013-04-26 from China - Henan
| | | 0 | Sell | Hemispherical dish end with petals
...andard: GB/T 25198-2010, ASME VIII
2.technic: forged
3.material: carbon steel
Place of Origin Hebei, China
(Mainland) Brand Name jixin
Model N... ...ed
quality assurance ISO 9001:2008
material carbon steel
forming hot mould pressing and
warm spinning
groove acc. to your drawing
surface treat...
Posted on: 2013-03-15 from China - Hebei
| | | 0 | Sell | Coil spring
...ng. Compression spring. tension spring., Mould spring,, Material: Spring steel. Color: Coffee. Red. Blue. Green. Yellow
Standard: MISUMI. PUNCH
... Coil spring. Compression spring. tension spring., Mould spring,, Material: Spring steel. Color: Coffee. Red. Blue. Green. Yel...
Posted on: 2013-01-14 from China - Guangdong
| | | 0 | Sell | We are looking for traders who will sale our chemicals in Gulf
...cting spray, Textile spray, water based grease remover spray, Construction steel and equipment coating etc at Pune, Maharashtra, which eliminates oil, Poll... ...rrosive Agents, Rust Remover Agents and Automobile Chemicals, Anti spatter Mould release Spray, Electronic panels cleaning and protecting spray, Textile sp...
Posted on: 2013-03-29 from India - Maharashtra
|  | | 0 | Sell | Stamping Parts Processing
...dow-blinds, etc. Processing thickness:0.1-6mm
Processing Matiral: Iron, steel, Stainless
Steel, Aluminium, copper, etc. Processing Width:350mm
mach... Stamping Parts
We could provide stamping mould
and stamping parts for any
application product, such as support frame...
Posted on: 2013-02-13 from China - Guangdong
| | | 0 | Sell | Anesthesia mask production line
...ystem. 2.Forming tunnel furnace: Total length:8 meters, made of stainless steel, the main parts are import from Japan&Germany. 3.Cooling tunnel: Total le... ...ows: 1.Glue-pouring system: Including: mixing, vacuumizing, glue-pouring, mould Auto reverse system and materials recovery system. 2.Forming tunnel furna...
Posted on: 2013-03-29 from China - Guangdong
| | | 0 | Sell | Guangzhou Sell Anesthesia mask machine
...ystem. 2.Forming tunnel furnace: Total length:8 meters, made of stainless steel, the main parts are import from Japan&Germany. 3.Cooling tunnel: Total le... ...ows: 1.Glue-pouring system: Including: mixing, vacuumizing, glue-pouring, mould Auto reverse system and materials recovery system. 2.Forming tunnel furna...
Posted on: 2013-03-19 from China - Guangdong
| | | 0 | Sell | Electromagnetic Stirrer (EMS)
... principle, Electromagnetic Stirrer (EMS) is used for improving quality of steel blooms or bars in CCM. Electromagnetic Stirrer can be placed inside or out... ...r bars in CCM. Electromagnetic Stirrer can be placed inside or outside the mould. Macro effects, such as Equiaxed zone, porosity, segregation, surface qual...
Posted on: 2013-01-05 from China - Hunan
| | | 0 | Sell | Supply anesthesia mask production line
...ystem. 2.Forming tunnel furnace: Total length:8 meters, made of stainless steel, the main parts are import from Japan&Germany. 3.Cooling tunnel: Total le... ...ows: 1.Glue-pouring system: Including: mixing, vacuumizing, glue-pouring, mould Auto reverse system and materials recovery system. 2.Forming tunnel furna...
Posted on: 2013-03-02 from China - Guangdong
| | | 0 | Sell | Microwave spices dryer and sterilizer equipment-condiment drying
...pacity of material. 3.The equipment is made of highquality 304#stainless steel, compact structure, no energy dissipation, save energy. Tunnel type design... ...ion, paperboard is uniform, smooth, no deformation. Sterilization, drying, mould proof. My e-mail: hltggl06@163.com
Posted on: 2013-09-13 from China - Shandong
| | | 0 | Sell | Slitter scorer
...oard and roll the line. The working axle is used the good quality seamless steel pipe and has the advantages such as wear-resisting, long using life and so... ... has the advantages such as wear-resisting, long using life and so on. The mould of the machine can be made for three times of rolling the line and two tim...
Posted on: 2013-07-11 from China - Beijing
| | | 0 | Sell | Superior cinema seat made in China
... density is 60kg/m3. 2. Inner construction: 10mm thick back&seat plywood, steel frame instead of wooded frame inside the seat allows for lifetime use. 3.... 1. Foam: cutting and mould foam. Back foam density is 45kg/m3 while seat foam density is 60kg/m3. 2....
Posted on: 2012-11-21 from China - Guangdong
| | | 0 | Sell | Mold flux for your continuous casting system
...our continuous casting system: Continuous casting mold flux for stainless steel bloom
Continuous Casting Mold flux for Bloom and Rectangle Billets
Cont... ...ting Starting flux
Special C.C Mold flux for Ultra Low Carbon Steels
C.C Mould flux for Medium Carbon Steel Slabs
09Cu Special C.C flux
Continuous Cas...
Posted on: 2013-01-16 from China - Henan
| | | 0 | Sell | SH-380 Toast Moulder
Machine Character
1.All round rod design, fast mould speed. 2.Stainless steel roller, correspond with current health standard. 3.The dough could be exh... Machine Character
1.All round rod design, fast mould speed. 2.Stainless steel roller, correspond with current health standard....
Posted on: 2012-12-03 from China - Shanghai
| | | 0 | Sell | Damp proof and permeable membrane
...gh stiffness, and is widely used as waterprofing materials in underground, steel structure and roofing material. ...thability which expell water vapour out of the construction, thus avoiding mould and condensation. In this way, the functions of construcion can be welly p...
Posted on: 2012-11-09 from China - Jiangsu
| | | 0 | Sell | Plastic box mould
...) Design
software: UG, CATIA, PRO-E,solid
works and auto CAD
3) Mould steel material: cavity, core and slide:P20, 718,NAK80,S136,SKD11,8407, 12363,... 1) Mould design: mould design
according to the 2D drawing or
3D file
2) Design
software: U...
Posted on: 2012-08-29 from China - Zhejiang
| | | 0 | Sell | Plastic injection mould
...) Design
software: UG, CATIA, PRO-E,solid
works and auto CAD
3) Mould steel material: cavity, core and slide:P20, 718,NAK80,S136,SKD11,8407, 12363,... 1) Mould design: mould design
according to the 2D drawing or
3D file
2) Design
software: U...
Posted on: 2012-08-29 from China - Zhejiang
| | | 0 | Sell | Battery case mould
...) Design
software: UG, CATIA, PRO-E,solid
works and auto CAD
3) Mould steel material: cavity, core and slide:P20, 718,NAK80,S136,SKD11,8407, 12363,... 1) Mould design: mould design
according to the 2D drawing or
3D file
2) Design
software: U...
Posted on: 2012-08-29 from China - Zhejiang
| | | 0 | Sell | Anesthesia mask production line
...ystem. 2.Forming tunnel furnace: Total length:8 meters, made of stainless steel, the main parts are import from Japan&Germany. 3.Cooling tunnel: Total le... ...ws£º
1.Glue-pouring system: Including: mixing, vacuumizing, glue-pouring, mould Auto reverse system and materials recovery system. 2.Forming tunnel furna...
Posted on: 2012-12-19 from China - Guangdong
| | | 0 | Sell | Pipe Fittings
Article: Stainless steel pipe fittings of investment casting
Casting type: investment casting, los... ...ng, plating, pickling, sand blasting, Lead time of the investment casting mould :30days
Brand Name: Oriens investment casting
Delivery term: FOB Tianji...
Posted on: 2012-08-08 from China - Beijing
| | | 0 | Sell | Building hardware Bracket
...asting, precision casting, silicasol lost wax casting
Material: Stainless Steel, Carbon Steel, Alloy steel
Secondary operation: Machining, Grinding, pol... ...ng, plating, pickling, sand blasting, Lead time of the investment casting mould :30days
Brand Name: Oriens metal investment casting
Delivery term: FOB C...
Posted on: 2012-08-08 from China - Beijing
| | | 0 | Sell | Metal stamping furniture hardware
...ng, milling, Turning, wire EDM, Bend Forming
Material: Cold & hot rolled Steel, Galvanized steel, Stainless steel, carbon steel, steel alloys, hardened m... ...polishing, sand blasting, anodizing, etc. Lead time of the metal stamping mould :30days
Brand Name: Oriens metal stamping
Custom manufactured according ...
Posted on: 2012-08-08 from China - Beijing
| | | 0 | Sell | Stainless Steel Laser Marking Machine
...el of Machine CX-SD-50/70/80/100/150 (optional) Laser tube Semi-conductor mould
Cutting Area 110mm×110mm /300mm×300mm (optional) Laser Power 50W/70W/80W...
Posted on: 2013-01-10 from China - Hubei
| | | 0 | Sell | Casr iron, plastic and steel concrete mould manufacturer
... line, the production of plastic test mould, cast rion concrete moulds and steel concrete moulds. low prices, high accuracy, easy to use and it is not easy... ...t demand, new plastic mold production line, the production of plastic test mould, cast rion concrete moulds and steel concrete moulds. low prices, high acc...
Posted on: 2012-11-22 from China - Hebei
| | | 0 | Biz. Op. | Frp mold. pultrusion die, fiberglass mould
...rs manufacturing experiences for pultrusion factory in China
forged mold steel Cr12,38CrMnAl
skilled machining, CNC mill machine
Hard chrome plate or n...
Posted on: 2012-03-22 from China - Henan
| | | 0 | Sell | Copper Mould Tube
...mm; 160×160mm; 170×170mm; 180×180mm; 180×240mm; 135×400mm; 6.Stainless steel mould-cooling
jacket
The main features of our cooling
jackets include... 1,Tubular mould
The material of the tubular mould
is CuDHP, CuAg, CuCrZr, CuNiP. 2,Plate mould
3,Mould assembly
Mould ...
Posted on: 2012-08-07 from China - Hebei
| | | 0 | Sell | A2/1.2363/Cr5Mo1V
Performance Characteristics: Cold work mould steel, similar to ASTM A2,it is a kind of widely used steel in A. Good wear resi... Performance Characteristics: Cold work mould steel, similar to ASTM A2,it is a kind of widely used steel in A. Good wea...
Posted on: 2012-05-22 from China - Hubei
| | | 0 | Sell | Series Hydraulic Notching Machine for Angle Steel
... Machine Features: The machine with opening C-type structure, its cutting mould is rectangular double-blade mode. Multi-directions rotational corner cutti...
Posted on: 2012-07-26 from China - Shandong
| | | 0 | Sell | Stamping die for magnetic steel EI lamination
1 Stamping die for magnetic steel EI lamination
2 Tungsten carbide
3 More than 30 years experiences in t... ...ility, long tooling life, high grade quality raw materials
6 Applicable: mould with silicon steel lamination production for our customer electrical silic...
Posted on: 2012-03-23 from China - Guangdong
| | | 0 | Sell | 200T tablet press - Model 200T-A machine is in high level
...is of anti-rust and anti-corrosion. *Its surface material is of stainless steel which can keep the machine from corrosion and pollution. *It is of four-p... ... tablet, ceramic, magnetic tablets, and bath salt tablets and so on. *Its mould or other key parts are made of Titanium material which is of anti-rust and...
Posted on: 2012-03-31 from China - Jiangsu
| | | | | 2 1 << Previous Page Next Page >> 1 2 | | | Related Site Sections:
|
|
Trade Leads Directory -> All Trade Leads
